Turntable hookup

Content
  • RX-V381 Phono/Turntable hookup
  • How to Connect a Turntable
  • Turntable hook up
  • How do I hook up a turntable to Yamaha HTR-5940 receiver?
  • The 3 things you need to create an amazing turntable setup for under $350
  • Cutting Out the Middleman: Turntable Setups Without a Receiver
  • How to Buy the Best Turntable and Stereo System for Your Record Collection
  • Vinyl on Sonos
  • Turntable hookup

Technics MK7 Base Price: DJ Worx , pending manufacturer confirmation Release: May We take a look at how it stacks up against the new SL MK7 below. The humble drum pad section has transformed into a turntablism powerhouse. In fact, it is a midi instrument.

RX-V381 Phono/Turntable hookup

If you’ve never hooked up a turntable before, the whole process can seem rather confusing. In this article, we’ll see how you can easily hook up the turntable yourself. This will work for any other turntable with the same basic features. Your turntable will need RCA output jacks, usually located on the back of the turntable. We’re also going to look at some specific drawbacks of the AT-LP60, because it’s one of the most common turntables purchased by and for beginners.[rs_table_products tableName=”Best Dating Websites”]

Reader-Supported Site This article is made possible only with the support of readers like you, when you use the links on here to purchase your gear. The small commissions from sales are the only way I can keep this site going so I can continue to help you. Thank you in advance for your help. Which Speakers? It’s also made by a company that produces much higher-grade turntables. That means at least in concept, they know what they’re doing.

Realize, of course, that at the lowest price-point, you’re not going to get the overall quality of one of their more expensive units. The AT-LP60 has a built-in phono pre-amp. That also means with the right adapter , you could even hook it to something that has a 3. There are other turntables that have their own preamp, also.

The AT-LP60 has auto return , which is more of a beginner feature. There were better turntables in the 70’s that had it, but mechanically it’s kind of expensive to implement well. Also, auto return decides when to lift the tonearm, and it initates this whole sequence of lift-move-drop that you can’t interrupt once it starts. That can be kind of frustrating for advanced users. However, you might be glad to have the auto-return feature if you’re just getting started in vinyl. Auto return means you don’t need to be standing right there when the record is finished playing.

The tonearm will return to the starting position. Again, this feature is not on the better and more advanced AT-LP , partly because advanced users can find auto-return to be annoying. It might also stress the tonearm assembly, which could affect playback fidelity. If you’re a beginner with scratchy thrift-store vinyl, you might not care about that or even notice it. OK, now let’s see how to hook up the turntable. Amplifier or Stereo Receiver. You might already have these.

If not, we’ll look at some choices for a beginner. Actually they are wired permanently into the back of the unit, which is true for some other beginner models as well. Table of Contents Which Amplifier? There is a way that combines the amplifier and speakers into one, and we’ll look at that soon. If you like the flexibility of a separate amp and speakers, keep reading this section. Now, wattage. When you see those mini stereo systems that advertise ” watts”, realize that it’s bogus.

The marketing departments are trying to get you to play a sucker’s game that’s been going on for at least fifty or sixty years. Probably, the actual output is more like watts, if that. With some of these things, it’s more like 25 watts. The marketing types think they have to lie to you this way, because they’ve built up so much hype about stereo wattage. They’ve been doing this for decades.

Many people do not realize that you can get beautiful sound from a one-watt amplifier and a pair of small speakers. In fact, you can make it loud enough to ruin your hearing. One watt! So which amplifier? If you want to keep it low-cost: Actual output? I think it’s about five to ten watts. You know that an amp that cheap is going to have quality-control issues.

One big reason is that they probably use cheap no-name capacitors, which fail. The cheap wall-wart power supply is another one of the weak points. However, if you get a good unit that survives, it’s the cheapest amplifier that actually has passably good sound. What’s really nice about this unit is that it can be modified for much better quality, as long as you know what you’re doing. There is practically a whole community of people who mod this amplifier. And they are quite happy with it. If so, it has to plug into a phono pre-amp, which may or may not be present in your amplifier.

The cheap Lepai doesn’t have one, but many of the full-size home stereo amps do. If your turntable does not have its own pre-amp, and your stereo does not have one either , just get one of these phono pre-amps and an extra set of RCA cables. Again, that will allow you to use a non pre-amplified turntable with a stereo receiver that has no “PHONO” jacks.

A few other turntables also have this feature. This puts the output power at what’s called “line level”, meaning that it’s already pre-amplified enough for any standard device to receive the signal. They probably figured that beginners would not want to mess around with an external phono pre-amp. So, once again, if you have the AT-LP60, you don’t need to worry about any of this.

Table of Contents Which Speakers? Get good ones. It’s like buying a good camera, only to take pictures through a dirty, scratched-up lens. It makes it impossible to know just how good the other equipment really is or isn’t. And like a camera lens, you can always move the good speakers to a better stereo when you upgrade later. To achieve that “big sound” without having a big stereo, you need sensitive speakers. Look for speakers with sensitivity of 90 dB or higher.

Try to get decent speakers from the start; later on, you can always use them with some other stereo system. High sensitivity means you don’t need as much amplifier power to get good sound out of them. The B-3’s have very high sensitivity Look for a used or old-stock pair through this link. These will work great with very low-powered amps.

Shortly we’ll look at another type of speaker which has the amplifier built-in. Then you wouldn’t even need a separate amplifier. That means the output is at “line level”. There are some headphones that will work OK by direct plugging well, you need an adapter, maybe like this one , but it costs very little. However, you won’t be able to adjust the volume unless the headphones have built-in volume control. Better solution One of the lowest-cost and most popular is this one , cleverly built in a metal tin.

This is probably what I would get for this type of situation, because it uses standard components rather than surface-mount. A little headphone amp like this is also good as a “desktop volume control” for your computer audio, when you’re not using your turntable. Just a reminder Table of Contents Another Option: Powered Speakers So far we looked at speakers and amplifiers for your turntable. Well, nowadays there is a shortcut you can take.

Today they make speakers that also have their own amplifier. I think I used to see these around in the Eighties, but they were uncommon, sort of a novelty item. You’re going to supply the turntable. There are many powered speakers on the market today. Another idea, which may provide even better sound and look better , would be this set from Mackie. These don’t have a separate subwoofer to contend with, but they also don’t have that nice control box that the Genius speakers have.

That should give you a working mini stereo system. It will be way more awesome than most of those mini systems you could buy in a store. With modern speaker technology, 4″ speakers can provide surprisingly big sound. Set the turntable up where you want to use it. Don’t use a rickety card table or flimsy shelves. Set the turntable on a solid, well-built surface.

Boosting this signal is the job of the phono preamp, also known as a phono stage, phono EQ, RIAA preamp, or turntable preamp. This receiver has a built-in phono preamp with a dedicated “PHONO” input to plug in a turntable. All you have to do is plug your turntable’s audio signal. If your receiver has a “PHONO” input, you can simply connect your turntable to that Note: If your turntable has a built-in preamp, it should be turned OFF when .

Forums New posts Search forums. E-Books E-Books Quicklinks. Get our latest product reviews and AV stories emailed to you weekly Subscribe. Product Reviews Loudspeakers Quicklinks.

All Audio-Technica turntables have an analog output RCA connection which will allow the user to connect directly to powered speakers. This is possible since our engineers integrated an internal RIAA preamp into all of our turntables.

Please make sure that you’ve entered a valid question. You can edit your question or post anyway.

Turntable hook up

I am trying to hook up our HP Pavilion Slimline f to a turntable to record audio. I don’t see the required phono L and R jacks on the back. Am I missing something? Do we need to upgrade? Go to Solution. You can also plug to that port with a right cable BUT the sound quality is not good.

How do I hook up a turntable to Yamaha HTR-5940 receiver?

I had no stereo and knew little about what I was getting into. What took me the longest to understand was why I needed a receiver, and what the hell was a pre-amp? I just wanted to get the music from my turntable to the speakers in the simplest way possible. The simplest turntable setup is easier to put together than you might think. Yes, you can stop there, but there are further and potentially even better options. The growth of vinyl culture has spread so much that some brands now make high-end powered speakers with built-in preamps —which means you can add any turntable you want and still avoid a receiver. They look sleek, they boast incredible sound, and, with their small footprint, they are truly minimal. I have a pair hooked up to my computer and they scream. Easy Upgrade:

In a time when filling a room with sound can be as simple as tapping your phone, getting into vinyl can be intimidating.

Forums Quick Links. Members Quick Links. NI Community Forum. Ok I’ve read so much on this but can’t find the exact info I’m looking for.

The 3 things you need to create an amazing turntable setup for under $350

Setting up your turntable is simple, but there are many ways to do it. Before diving in, you should make sure you are familiar with some basic terminology and setup types. A phono preamp is a crucial component in any turntable setup. If you have an amp or receiver with a clearly labeled phono input, then you are all set — this means that your amp already has a phono preamp in it. If not, you will need a phono preamp — available either as a standalone component or built-in to the turntable itself this option is available on all Orbit models. The name says it all – this first setup is as simple as it gets. What are powered speakers? In addition to bookshelf powered speakers, there are a number of common speakers that will work well for this:. An oldie but goodie. First, you connect your Orbit to a stereo receiver with a dedicated phono input using the included RCA cables. Next, you connect your stereo receiver to bookshelf or floorstanding passive speakers using speaker wire.

Cutting Out the Middleman: Turntable Setups Without a Receiver

First things first — the simple setup: Plug the matching cables coming from your turntable in the phono jacks. This is called the ground wire. Just be sure not to put the turntable too close to your speakers! More on that below, too. It requires additional amplification and some EQ to bring it up to a proper signal.

How to Buy the Best Turntable and Stereo System for Your Record Collection

If you’ve never hooked up a turntable before, the whole process can seem rather confusing. In this article, we’ll see how you can easily hook up the turntable yourself. This will work for any other turntable with the same basic features. Your turntable will need RCA output jacks, usually located on the back of the turntable. We’re also going to look at some specific drawbacks of the AT-LP60, because it’s one of the most common turntables purchased by and for beginners.

Vinyl on Sonos

Menu Menu. Search Everywhere Threads This forum This thread. Search titles only. Search Advanced search…. Everywhere Threads This forum This thread. Search Advanced…. Log in. New posts Trending Search forums.

Turntable hookup

The Insider Picks team writes about stuff we think you’ll like. Business Insider has affiliate partnerships so we get a share of the revenue from your purchase. U-Turn Audio Unlikely as it may seem, the vinyl revival is a real thing; after falling out of favor in the late 80s, vinyl has become the physical format of choice for younger listeners. Putting together a turntable setup that will give you a great listening experience without breaking the bank is challenging. The three components that I’ve recommended below will sound great, especially at an entry-level price.

Love the vintage crackle of vinyl but crave the crisp sound of Sonos? Get both. Connect your turntable to your Sonos home audio system in minutes and start spinning and streaming your heart out. You can learn more about this on our Community site. Plug your turntable directly into our biggest home speaker with the boldest sound, straight through its line-in functionality. Plug one end of an audio cable into the headphone jack of your turntable, the other into the line-input at the back of your speaker. Use your amplified audio equipment to bring your vinyl collection to more rooms with Sonos Connect.

RECORD PLAYERS: Vinyl Audio Setup (Connecting Everything)p{text-indent: 1.5em;}

Leave a Reply

Your email address will not be published. Required fields are marked *